Printed in USA
©2017
TVW
Page 10
E-TILESHARK-Revised-1117
100 Thomas Johnson Drive, Frederick, MD 21702-4600 USA
Phone (301) 663-1600 • 1-800-638-3326
Fax (301) 663-1607 • 1-800-447-3326
Website: www.edcoinc.com • Email: [email protected]
Maintenance
• All maintenance should be performed regularly and by qualified personnel only.
•
Grease striker plate driven shaft bearing every 4 hours of use. (Figure 7 & 7A).
Use Lubriplate #1444 High Temperature grease or equivalent.
• Lubricate the wheel bearings from time to time with an occasional drop or two of oil
to prevent binding.
• Keep the Tile Shark clean.
• Be sure the safety decals are readable and properly maintained on the machine.
• The Tile Shark can be stored or transported in the folded position as shown on
page 3 to save valuable cargo space. DO NOT store or transport with blade
attached.
Disconnect the power source at the machine and remove blade before
performing any maintenance.
Repairs are to be done
by authorized EDCO
Dealers only.
Read and follow instruc-
tions in the engine owner’s
manual.
Figure 7
Grease point
under cover
Grease point
inside opening
Figure 7A
Visual Inspection of Machine and
Power Cord
Before
Operation
As necessary (prevents bind
-
ing)
After Each
Use
Quick Reference
For Maintaining
the Tile Shark
X
X
X
X
Oil wheel bearings
(with light weight oil)
Clean dust, dirt and mastics
from machine
Inspect Blade
X
Grease Striker Plate
Driver Shaft Bearings (2 ea)
Every 4 Hours
