Edco HSS-14 Operator'S Instruction Manual Download Page 3

E-HSS14-I-0517

EQUIPMENT DEVELOPMENT CO., INC.

Page 3

800-638-3326 • edcoinc.com • [email protected]

HSS-14 14” Hardscape Saw 

Safety/Warnings......................................................................................................2
Specifi cations/Table of Contents.............................................................................3
Safety Guidelines....................................................................................................4
Operating Instructions.............................................................................................5-7
Maintenance............................................................................................................8-10
SMI Dust and Silica Warning...................................................................................10
Maintenance Schedule............................................................................................11
Limited Equipment Warranty....................................................................................Back Page 

 

Section 

Page Number

Table of Contents

Note:

All dimensions and 

weights are for 

reference only

 

and subject to change 

at any time.

HOW TO ORDER REPAIR PARTS

To  insure  product  safety  and  reliability,  always  use  genuine 

EDCO  replacement parts when making repairs to the equip-

ment.
When ordering parts, please specify the MODEL and SERIAL 

NUMBER of the machine as given on the NAMEPLATE.  In 

addition, give part number, description and quantity as listed 

on the parts list.
Please note: Due to improvements and changes in the equip-

ment the illustrations shown may be diff erent from the actual 

machine.

Toll Free:  Phone 1-800-638-3326 • Fax 1-800-447-3326

A

B

C

“A”

“B”

“C”

--

--

Weight

42”   106.68cm

27”   65.58cm

20”   50.8cm

--

--

208 lbs.  94.3kg

Figure 1

HSS-14

NOTE: Shown with optional cart

Summary of Contents for HSS-14













Reviews: