Edco ASB-14 Operator'S Instruction Manual Download Page 9

MPS-I-0819

Page 8

Page 9

MPS-I-0819

E-SPTS-I-0809

800-638-3326 • edcoinc.com • [email protected]

800-638-3326 • edcoinc.com • [email protected]

EQUIPMENT DEVELOPMENT CO., INC.

EQUIPMENT DEVELOPMENT CO., INC.

This symbol means that the Operator’s, owners, instruction and/or manufacturer(s) manuals must be 

read and understood before operating or attempting to operate this electrical, gasoline, diesel or 

propane powered equipment, failure to do so can result in personal injury and possible death. 

(Blue background with white pictogram.)

This symbol means that proper eye protection must be worn/used during the operation of this equipment. There is

a potential risk of operator eye damage, injury or loss of sight. This also applies to any personnel standing

nearby observing the operation of this equipment.

(Blue background with white pictogram.)

This symbol means that proper ear protection should be worn/used during the operation of this equipment. 

There is a potential risk of operator hearing damage, injury or loss of hearing which will increase based on the 

length of exposure. This also applies to any personnel standing nearby observing the operation of this equipment.

(Blue background with white pictogram.)

This symbol means that proper head protection should be worn/used during the operation of this equipment there

is a potential risk of operator head injury from foreign or loose objects the equipment might come in 

contact with during operation. This also applies to any personnel standing nearby or observing the 

operation of this equipment.

(Blue background with white pictogram.)

This symbol means that proper breathing protection or engineering controls must be worn/used during the

 operation of this equipment there is a potential risk of operator lung damage. Repeated and/or substantial 

inhalation of airborne crystalline silica can cause serious or fatal respiratory diseases, including silicosis. In 

addition, to California and some other authorities have listed respirable crystalline silica as a substance known 

to cause cancer. When grinding/cutting/drilling such materials, always follow local respiratory precautions. 

This also applies to any personnel standing nearby or observing the operation of this equipment.

(Blue background with white pictogram.)

This symbol means do not insert fingers/digits under any edge of the belt cover while the engine/

motor on the machine is running because personal injury and loss of fingers/digits may result.

(Black pictogram with red “No” symbol outline)

This symbol denotes the lifting point and means that if lifting of this equipment is necessary use a lifting

device that is designed to accomodate or exceed the weight of this machine. Check the Operator’s

 manual for specifications. Using a device that is not designed to accomodate or exceed the weight of this 

machine could result in damage to the machine and personal injury. Do not lift equipment over people 

because death or serious injury could result.

(Blue background with white pictogram.)

This GHS pictogram identifies that the chemicals contained present serious health hazards.

(Black pictogram with red diamond symbol outline)

SAFETY SYMBOLS

Summary of Contents for ASB-14





















Reviews: