Operation
DT 500 Rev1.0 May20
Page 29 of 48
9.3.1.2
Input / change consumption counter
Setup
→
Sensor Setup
→
Total Counter
→
Unit button
Important!
When the counter reach 100000000 m³ the counter will be reset to zero.
9.3.1.3
Definition of the units for flow, velocity, temperature and pressure
Setup
→
Sensor Setup
→
Units
In order to change, e.g. the unit, first select by
pressing key
“
“
the button
“Unit”
and then
key “
OK”
.
Select with the key
“
“
the correct unit and
then confirm selection by pressing 2x
“OK“
.
Entering / changing the consumption counter
via button
“
“
, select the respective position
and activate the position with the
"OK"
button.
By pressing
“
“
the position value is
incremented by 1.
Complete with
"OK"
and
activate next number position.
Confirm entry by pressing
“OK“.
To make changes to the unit for the respective
measurement value, first select by pressing
“
“
the field of the
“measurement value“ and
activate it with
“OK“
.
Selection of the new unit with
“
“
In case the quantity of units selectable are not
presentable on one page, pleas move to next
page by pressing
“<<“
.
Confirm selection by pressing 2x
“OK“
.
Procedure for all 4 measurement variables is
analogous.
