manualshive.com logo in svg

Edax Audio Labs MP-800, Operation Manual, Page: 12 / 14

Share
Download
Edax Audio Labs MP-800 Operation Manual Download Page 12

WARRANTY

Edax Audio Labs warrants to the first purchaser of a new MP-800Vacuum tube
preamplifier that the unit is free of manufacturing defects in materials and workmanship

fora period of one (1) year from the date of purchase. Edax Audio Labs sole obligation

under this warranty shall be to provide, without charge, parts and labor necessary to

remedy defects, if any, which appear within one (1) year from the date of purchase. All

warranties expressed or implied made byEdax Audio Labs, including warranties of
merchantability and fitness, are limited to the period of this warranty. Edax Audio Labs

is not responsible for indirect, incidental or consequential damages arising from the

use or failure of this product, including injury to persons or property.

This warranty does not cover damage due to: misuse, abuse, modification, accident or
negligence. The warranty does not apply if the unit is repaired or altered by persons

unauthorized by Edax Audio Labs in such a manner as to injure, in Edax Audio Labs

sole judgment, the performance, stability or reliability of the unit. The warranty does

not apply if the unit is connected, installed or used otherwise than in accordance with the
instructions furnished byEdax Audio Labs There is no warranty on vacuum tubes.

If the equipment requires warranty repair, return authorization must be obtained from

Edax Audio Labs prior to shipment. Equipment should not be shipped to Edax Audio Labs

until return authorization and the proper shipping address is obtained from us.

The equipment (with all its components parts and connecting cables) must be suitably

packaged, including a note with the owner's name, address, telephone number and a

description of the reason for return. The owner pays two-way shipping , and we suggest

that the shipment be insured for its full value.

This limited warranty is in lieu of all other warranties, expressed or implied, and no

representative or person is authorized to represent or assume for us any liability in

connection with the sale of our products than set forth herein.

11

Summary of Contents for MP-800















Reviews:

No comments