Page 7
EPU160 User Manual EDID-2001-MAD
The
Copy…
button is enabled if there is more than one mmb16 attached. The
current device’s input settings can then be copied to one or more other attached
mmb16 devices. In the dialog that appears, click on each of the mmb16 devices you
wish to copy to. Click “OK” when done. You can revise the copied settings in the
main dialog, as they are not sent to the devices until you press “OK” in the main
dialog.
This will not copy the “Device Name” or “Beep” settings between devices.
The
Load…
and
Save…
buttons allow the import and export of the select device’s
input settings. The file is a plain text file, so can be editing using Windows’ Notepad program, or any other
plain text editor. This file can also be generated using an external tool, and then imported.
An example of the file generated is shown at the end of this document.
Typical Output
Each comment appears in the Chart record as shown below as well as listed in the Comments window,
accessed from the
Window
menu item. From the Comments window, you can selecting the item number to
go to the comment’s position in the Chart file.
Import/Export File Format
If you wish to modify the mmb16 settings file, or write a program to generate your own and avoid having to
enter a lot of configuration text, the details are below.
