EDAN Instruments
– SE-1010 PC ECG, Tango+ Interface Notes
Page 1 of 5
EDAN Instruments
– Twelve Channel ECG SE-12 Express
Tango+ Interface Notes
To setup Tango+ with the EDAN stress system, simply follow the directions below.
1. Verify Correct RS-232 and ECG Trigger Cables
RS-232 Cable
– used to communicate with the EDAN SE-1010 PC ECG Stress System.
This cable enables the EDAN Stress System to prompt Tango+ when it needs a BP
measurement, and allows the Tango+ BP reading to be transferred to the EDAN display
and reports.
o
Part provided by EDAN
o
Labeled connection ends connect as followed:
A
: Connects to the EDAN Stress System
B
: Connects to the SunTech Tango+ monitor
ECG Trigger Cable
– provides the ECG trigger signal from the EDAN Stress System to the
Tango+.
o
Part provided by EDAN
o
Labeled connection ends connect as followed:
A
: Connects to the SunTech Tango+ monitor
B
: Connects to the EDAN Stress System
B
A
A
B
