Page 27 of 40
The trigger type for input
one
is set as follows:
52
0
= Normally open and input will not latch.
1
= Normally open and input will latch.
2
= Normally closed and input will not latch.
3
= Normally closed and input will latch.
Default: 0 (Normally open)
By default all four inputs are set to Normally Open and the inputs will not latch. Each of the four
inputs must be programmed separately to change them from N.O. non-latching as follows:
Use
F52
for Input
1
, as in the example above.
Use
F62
for Input
2
.
Use
F72
for Input
3
.
Use
F82
for Input
4
.
Function F53 Wait Time Between Calls
This function determines the period to wait between one call and the next. The wait time allows
an opportunity for the user to call into the EDAC 400-02 to cancel the input or listen to the current
status messages. Each individual input has its own wait time.
Set the wait time for input
one
as follows:
53
Wait time between calls is …
1
to
9
= 1 to 9 minutes.
#
= 12 minutes.
0
= No wait time. Immediately call
next number.
Default: 4 (Four minutes)
Each of the four inputs must be programmed separately as follows:
Use
F53
for Input
1
, as in the example above.
Use
F63
for Input
2
.
Use
F73
for Input
3
.
Use
F83
for Input
4
.
