manualshive.com logo in svg

EDAC Electronics Ltd. EDAC700 RTU, Technical Reference Manual

Share
Download
EDAC Electronics Ltd. EDAC700 RTU Technical Reference Manual Download Page 39

 

Date: 31/10/12 

Page 39File: 700b Technical Manual ver1.9.3.docm 

 

5.5  Configure Rosters  (Roster Menu) 

If no Rosters are defined the EDAC700 RTU will default to using Call List 1.  A Roster 
must have at least one Call List or a number of Call Lists mapped to it.  Once one or 
more Rosters have been configured the operator can change the current Roster either 
via the menu options using a touch-tone phone or the EDAC700 RTU keypad. 
  

Program Mode -> Configure Dialler -> Configure Rosters 
 

 

 
The “Roster” menu includes Add & Delete roster options. 
As you define new Rosters using Add a roster, they are added to the list in this menu.  
You can modify any existing entry by pressing <Ok> when its name is displayed.   
 

 

 
You can give the roster a meaningful name, or leave the default name.

 

 

 

 
This setting links a Call List to this roster.  The display is indicating that Call List 1 is 
connected to Group 1, so if Group 1 is triggered it will use Call List 1 to make alarm 
notification calls from. 
 
Use the arrow keys to scroll through the list.  The dialler will give a double beep on the 
last Call List entry. 
 

 

 
The next setting determines which Call List is used during the default time frame. 
 

 

 
Press <OK> to save and exit, or press <Esc> to discard any changes. 

Summary of Contents for EDAC700 RTU




























































Reviews:

No comments

Brands by name

Popular brands

Load more brands