10
INSTALLATION INSTRUCTIONS
10. As shown in Illustration 10, the cabinet door (D)
is reversible, and can be hinged on the left side
or the right side. To switch, simply unscrew the
4 screws on the base of the hinges, flip the
door to the other side of the cabinet, and
reattach the hinges to the pre-drilled holes on
the side panel.
9. To reinstall drawer(s) into cabinet (A), fully
extend metal glide tracks. Gently lower and
slide drawer box into rear glide catch. Next,
lower drawer box down to completely rest
on extended glides. Then, push plastic levers
to lock the drawer box in place.
Note:
Drawer box alignment can be adjusted,
if necessary. As shown in the diagram, spin
the adjustment wheel to the left to raise the
drawer box, or to the right to lower the drawer
box. The left and right-side glide heights can
also be adjusted independently in order to find
the drawers best alignment position.
CAUTION
DO NOT
force drawer or damage to glide(s) may
occur. If drawer does not slide in with ease,
remove and try again from the start.
9
1
2
3
A
10
OR
1
D
2
D
