10
INSTALLATION INSTRUCTIONS (Semi-Recessed Sink)
9. To reinstall drawer(s) into vanity (A), fully
extend metal glide tracks. Gently lower and
slide drawer box into rear glide catch. Next,
lower drawer box down to completely rest
on extended glides. Then, push plastic levers
to lock the drawer box in place.
Note:
Drawer box alignment can be adjusted,
if necessary. As shown in the diagram, spin
the adjustment wheel to the left to raise the
drawer box, or to the right to lower the drawer
box. The left and right-side glide heights can
also be adjusted independently in order to find
the drawers best alignment position.
CAUTION
DO NOT
force drawer or damage to glide(s) may
occur. If drawer does not slide in with ease,
remove and try again from the start.
10. Insert the four drawer dividers (E) into the
notch on the left and right sides of the inside
of the upper drawer (F).
9
A
1
2
3
10
E
E
A
F
