20
INSTALLATION INSTRUCTIONS (Undermount Sink)
8
1
2
2
A
B
Hardware Used
Sink bracket
x 4
Nut
x 4
x 4
Lock Washer
Wrench
x 1
7. Lower the sink brackets (JJ) over the bolts
(II) and allow to rest on the sink lip. Adjust
location of bracket to firmly grasp sink lip.
Lower lock washers (LL) over bolts (II) and
secure with nuts (KK). Hand tighten nuts (KK)
with included wrench (MM).
DO NOT OVER TIGHTEN!
Tip: Check that the sink placement is well
centered front to back and side to side of the
stone top cut out before allowing the silicone
caulk to dry. If the sink is not centered well
unscrew sink clamps, re-adjust the sink position
and re-tighten the sink brackets.
7
1
JJ
3
2
MM
LL
II
KK
D
B
BACK
BACK
JJ
KK
LL
MM
8. To install the Top (B) to the vanity (A).
Apply silicone caulk to the top edge of the
wood cabinet. With the help of another adult,
gently lower the stone top with assembled sink
onto the cabinet. Make sure the stone top is flush
with the back side of the wood cabinet and the
stone overhang is equal on both sides over the
wood cabinet left and right side walls. Remove
any excess caulk before allowing to dry.
Helpful tip: it may be easier to install your
choice of faucet (not included) before securing
the vanity top (B) to vanity base (A).
