4
en
circuit
1
VehIcle PreParatIons
2
5
3
4
chargIng the VehIcle Battery
1. Connect the AC power cord to the power slot on the charger, then
connect the other end of the power cord to an AC power source.
2. The Power LED and Charging LED will turn GREEN when the charger
is connected to the AC power source.
3. Connect the battery pack connector to the charge connector.
4. Press the On/Off button to charge the battery. The Charging LED
turns RED.
5. When the battery pack is fully charged, the Charging LED will
turn GREEN.
6. Press the On/Off button to stop charging. Disconnect the battery
pack connector from the charge connector.
CAUTION:
If at any time during the charge process the
battery pack(s) becomes hot to the touch, unplug the battery
immediately and discontinue the charge process.
The vehicle battery charger produces 2000 milliAmps (2 Amps) per hour.
Divide the mAh capacity on the label of a battery by 2000 to know how
long battery charging will require. For example, an 1800mAh battery
requires 0.9 hours (54 minutes) to charge.
chargIng WarnIngs and
PrecautIons
• Read all safety precautions and literature prior to use of this
product.
• Never allow minors to charge battery packs.
• Never attempt to charge dead or damaged batteries.
• Never charge a battery if the cable has been pinched or shorted.
• Never allow batteries or chargers to come into contact with
moisture at any time.
• Never charge batteries in extremely hot or cold places
(recommended between 50–80°F or 10–26°C) or place in direct
sunlight.
• Always use only Ni-MH rechargeable batteries. This charger cannot
charge batteries such as “heavy duty”, “alkaline”, “mercury” or
“lithium" battery.
• Always connect the positive red lead (+) and negative black lead (-)
terminals of the battery to the charger terminals correctly.
• Always disconnect the battery and charger after charging and let
them cool between charges.
• Always inspect the battery before charging.
• Always terminate all processes and contact Horizon Hobby if the
product malfunctions.
• Always make sure you know the specifications of the battery to be
charged or discharged to ensure it meets the requirements of this
charger.
• Never connect more than one battery pack to this charger at a time.
• Always constantly monitor the temperature of the battery pack
while charging.
• Always end the charging process if the charger or battery becomes
hot to the touch or starts to change form during the charge process.
coMPonents
1. ECX
™
Circuit
™
1/10-scale Short Course Truck
2. ECX
™
2.4GHz Transmitter
3. AA (4) Batteries
4. 2A Peak Battery Charger (DYN4113)
5. Dynamite
®
Speedpack
™
7.2V
Ni-MH battery (DYN1050EC)
