background image

6

EN

TormenT

transMItter controls

Battery leVel 

IndIcator

Solid Green: Battery 

voltage is good (above 

4V).
Flashing Green: Battery 

voltage is critically low 

(below 4V). Replace 

batteries.

throttle trIM

Adjusts the neutral point 

of the electronic speed 

control.

steerIng trIM

Adjust to make the vehicle 

drive straight with no input 

at the steering wheel.

PoWer sWItch

Power on 

or off the 

transmitter.

steerIng Wheel

Control steering. Right and 

Left steering with ST. REV 

Switch on N  

(see ST. REV switch).

throttle trIgger

Controls power to motor for forward 

or reverse (see TH. REV switch).

Stop

Reverse  

(when TH.  

REV switch 

on N).

Forward  

(when TH.  

REV switch on N).

steerIng rate

Adjusts the amount the 

front wheels move when the 

steering wheel is turned left 

or right.

reVerse sWItch

Allows you to change the 

direction of steering  (ST. REV) 

and throttle (TH. REV) controls 

(default settings are “N” for 

steering and “N” for throttle).

changIng the traVel adjust  settIngs

The travel function supports precise endpoint adjustments in 

each direction for the steering and throttle channels.
1. Hold the trigger in the full brake position while powering 

on the transmitter. The LED flashes rapidly, indicating the 

programming mode is active.

2. Throttle End Point: Hold the trigger in the full throttle position. 

Turn the TH TRIM knob to adjust the full throttle end point.

3. Brake End Point: Hold the trigger in the full brake position. 

Turn the TH TRIM knob to adjust the full brake end point. 

Return the trigger to the center position.

4. Left Steering End Point: Hold the steering wheel in the full left 

position. Turn the ST TRIM knob to adjust the left end point.

5. Right Steering End Point: Hold the steering wheel in the full 

right position. Turn the ST TRIM knob to adjust the right end 

point. Return the steering wheel to the center position.

6. Power off the transmitter to save the travel adjust settings. 

The minimum Travel is 75%, and the Maximum travel is 

150%. The default travel settings are 125% steering and 

100% throttle.

All manuals and user guides at all-guides.com

all-guides.com

Summary of Contents for ECX03026AU



















Reviews: