8
13
Video Monitor controls
When powered on, the video monitor is in FPV mode. The buttons have the following functions while the
monitor is in the various video modes:
FPV mode
• CH Button:
Press once to change the chan-
nel. Press and hold for approximately 3 seconds
to auto scan available channels.
• FR Button:
Press once to change the fre-
quency band. Press and hold for approximately
3 seconds to auto scan.
• M Button:
Press once to access the on-screen
menu. Press again to exit the on-screen menu.
• – and + Buttons:
Press to decrease or increase
speaker volume and to adjust menu selections.
• Back Panel Button:
Press once to start
recording to the DVR. Press again to stop
recording. Press and hold to change from FPV
mode to DVR mode.
DVR play-back mode
• CH Button:
No function.
• FR Button:
Press once to change between
DVR record mode and DVR playback mode.
• M Button:
Press once to enter/exit the on-
screen menu. While in the menu, use the back
panel button to highlight the desired selection
and the – and + buttons to adjust the settings.
• – and + Buttons:
Press to scroll through
recorded files.
• Back Panel Button:
Press once to play the
selected file. Press again to pause/resume the
playback. Press and hold to change from DVR
mode to FPV mode.
DVR recording mode:
Record video from the
built-in video receiver. (Micro SD card not included)
• CH Button:
No function.
• FR Button:
Press once to change between
DVR record mode and DVR playback mode.
• M Button:
No function.
• – and + Buttons:
No function.
• Back Panel Button:
Press to start/stop
recording to the DVR.
AV IN mode:
Display video from an external
video source (cables not included)
• CH Button:
No function.
• FR Button:
No function.
• M Button:
Press once to access the on-screen
menu. Press again to exit the on-screen menu.
• – and + Buttons:
Press to decrease or increase
speaker volume and to adjust menu selections.
• Back Panel Button:
Press to start/stop
recording to the DVR.
VIDEO MONITOR DVR FUNCTIONS
VIDEO MONITOR MODES OF OPERATION
75%
5.8GHz Antenna connector
Menu Buttons:
Use the
+
and
–
buttons to make
changes:
Frequency Band Button
Single push to change band
Channel Selection Button
Single push to change channel
Micro Memory Card Slot
ON/Off Switch
Charge Status LED
Red = charging
Green = charged
5V Micro USB
Charge Port
AV In
