ESD CONDUCTIVE CO.,LTD Expert of Static Control
Address :
151#,Houjie Dadao, Houjie Town,Dongguan City,China Post code 523961
E-mail: [email protected]
balance value from touch screen by press UP and DOWN button. After adjustment, the data show on screen is
3.3
Section 5
–
Installation and Operation
E-DNS06 Ionizing Air Snake can neutralize charges and eliminate dust inaccessible trouble spot hard to reach
area. It is a hand free flexible ionizing nozzle. The height and angle of nozzle can easily be adjusted.
Put the device at the working position you need. You may screw it if it is needed. The Air Snake comes with
a quick release air connector; simply connect it to a standard 8mm air hose. To connect tubing to quick connect
fitting: Cut end of plastic tubing square and clean. Push against the collar with thumbnail. While holding collar
in, push tubing into the fitting until it bottoms out completely.
Please ensure that the H
．
T
．
Cable securing gland is firmly tightened. This insures a good earth connection.
Connect the power cord to its corresponding inlet on the base of the ionizer.
Turn the unit on with the red button.
Section 6 Maintenance
Keep the air snake clean and free from oil, water and particle contamination.Use air drying and cleansing filter
regulator with 5 micron filtration. Ensure that all connections, pipe work and filter regulators will allow
minimum 15 CFM of air flow. Clean and purge filter regulators periodically and check for contamination in the
air delivery pipe. From time to time remove the front nozzle cap by unscrewing anti-clockwise, disconnect from
H.V. electric supply before removing the nozzle cap. Clean around the electrode pin with a pipe cleaner or
cylindrical soft brass brush. Ensure the plastic inner lining is free from gray or black carbonized residue. The
point of the electrode pin can be cleaned by pushing a pencil end eraser on to the electrode pin and rotating.
Blow out the loose debris and re-fit the nozzle cap before re-connecting the high voltage supply and operating.
The ion balance voltage and static elimination time of the ion air curtain are in compliance with the ESD
standard, and the static elimination time is measured
Section 7 Warranty and Service
1. The warranty period is one year. We will repair the products free of charge due to the quality problems
caused by the product's own parts, materials and process problems within one year from the date of sale.
2. After the maintenance period
After the maintenance period of the products sold by us, we are still responsible for repairing the labor of
the products to protect the our customers
’
interest.
www.esd-conductive.com
