20
Setup Manual - Lighting Control Engine 2
LCE2-fx video input setup
Before using the video input of the LCE2-fx you have to setup the video card.
Open the Blackmagic Design Control Panel from the Windows Control Panel.
Change the video standard to the same standard that your capture source uses.
After you applied the new settings you can start the Programmer and select the
Blackmagic WDM Capture Driver as capture source, e. g. in the Media Player.
The driver will now show the resolution in the combobox as you configured the
Blackmagic Design Control Panel.
Since a restart of the Programmer is required, the
Deckling Video Capture
driver
might be a more convenient way to setup a capture device with the
Blackmagic Intensity Pro. The Blackmagic Design Control Panel is also needed, if
you want to use the analog input instead of the HDMI input. You need to change
the
Set Input option
accordingly to the inputs you plan to use.
Summary of Contents for Lighting Control Engine 2
