ECTIVE SUNWALLET MSP, Operating Instructions Manual

Page: 12 / 16

10 ECTIVE SUNWALLET MSP
Compatible batteries and devices
Using an appropriate char controller, this solar module can be used to
charge or provide power to the following batteries and devices:
• sealed lead-acid batteries
• colloidal lead-acid batteries
• flooded lead-acid batteries
• lithium batteries
Cleaning the surface of the solar module
Remove any dust and dirt from the solar module’s surface using a soft
brush and then wipe the surface clean with a damp cloth. Any guano
should be removed as soon as possible to prevent a negative impact on the
solar module’s performance.
Troubleshooting
If the battery is not being charged, even though the module is directly
facing the sun, there may be an issue with the connections. Make sure the
solar panel is correctly connected and no connections are reversed. Also,
the solar charge controller may be damaged and may need to be replaced.
Always read and follow the instructions for any solar charge controller
you connect to the solar module.