ECTIVE Multiload Pro
21
Installation and Operation
Caution!
Before connecting the Multiload Pro to a battery, power off the device
DC Output Battery Connection
Always connect the battery first and the AC Power second
Step 1
Place the battery cable ring terminal over the Multiload Pro’s battery
terminal Be sure to follow to the battery polarity indicated next to the
terminals Tighten the M6*12 Screw Do not place anything between
the flat part of the battery terminal and the battery cable ring terminal,
as otherwise overheating may occur Apply anti-oxidant paste to the
terminals after they have been torqued
Step 2
Connect the battery cables to your batteries
Single battery connection
: When using a single battery, its voltage must
be equal to the voltage of the Multiload Pro’s nominal input voltage
Series battery connection
: When using multiple batteries in series, all
batteries must have the same voltage and Ah capacity The sum of their
voltages must be equal to the Multiload Pro’s nominal input voltage
Parallel battery connection
: When using multiple batteries in parallel,
each battery’ voltage must be equal to the voltage of the Multiload Pro’s
nominal input voltage
M6 screw
PVC Wire AWG
Terminal
