6.3 Using Repeater for charging ECPIN
6.3.1 With Battery
1. Put a AAA cell battery into the battery compartment
of the Range Extender SR200.
2. Slide the power source selector to “BAT” location.
3. Insert ECPIN to the repeater and close the lid.
4. The LED will be flashing during charging process and
turn off after completing the charging process.
5. If Amber LED colour is shown, the battery level is low
and it requires to replace a new battery.
6. Slide the power source selector to “USB” location
when you have completed the charging process.
7. Please take out the battery if you do not intend to use
battery as the power source or you will not use the
repeater for a long period of time.
6.3.2 With USB power source
1. Connect the external USB power source and the
repeater with the USB cable.
2. Slide the power source selector to “USB” location.
3. Insert ECPIN to the repeater and close the lid.
4. The LED will be flashing during charging process and
turn off after completing the charging process.
5. The LED will be flashing again with a slow flashing
rate which the repeater starts repeating the signal.
6. If you want to turn off the repeater, please disconnect
the repeater with the USB power source.
Figure 23. Using Repeater for charging ECPIN
