ECTACO SAT-1600
SAT-Words Tutor
User Manual
8
♦
Note:
You have one minute to replace the batteries without risk of losing the
data stored in RAM.
Do not exceed the one-minute limit!
Neither the
manufacturer nor the dealer may be held responsible for the loss of user data.
MultiMedia Card
ECTACO SAT-1600 MultiMedia Card is included in the standard package. The
card contains the operating system and a set of applications described in the
Applications chapter (see page 17).
•
Please insert ECTACO SAT-1600 MultiMedia Card into the MMC slot before
you turn the device on.
♦
Note:
Always make sure the device is turned off before installing or removing
the MMC.
Never insert or remove the card when the device is on.
Use the
On/Off button to turn the device off.
Installing MMC
•
Put your thumb on the MMC slot cover and slide it off.
•
Slide the MMC into the compartment with the contacts facing up and the label
facing down. Push the card gently until it clicks into place.
•
Snap the cover back on.
•
Turn the device on.
The operating system and program files will be installed on your ECTACO SAT-
1600. This will take about 2.5 minutes. When the installation procedure is
completed and the screen is calibrated, the
Setup
application will be shown.
•
Set the desired preferences (see page 46 for details) and tap
Done
.
If the MMC is not installed, a brief tour will be shown.
