ECTACO Partner
®
PW800
User Manual
5
MultiMedia Card (MMC)
Before you start working with your ECTACO Partner
®
PW800, please make sure the
MMC is installed into the MMC / SD slot of the device. If the card is not installed, slide
it into the slot located on the right edge of the device – the contacts of the card face
up, label face down. Push the card gently until it clicks into place. To eject the MMC,
just push it in slightly.
Initialization
The initialization routine is started:
• when ECTACO Partner
®
PW800 is turned on for the first time;
• after the system has been reset with the RESET button.
Note: The RESET button is located on the left-hand side of the keyboard (over the
key). It can be accessed with any thin object like a paper clip. Never use a needle or a
sharp pin for this purpose since it can damage the device.
Keyboard
The keyboard allows you to enter any word just in seconds. Language modes can be
toggled by pressing the
key.
The function and control keys are described below.
Note: Key1+Key2 here and further on signifies the combination of keys to use – first
press and release Key1, then press and release Key2.
Key
Function(s)
Turn the device On or Off
Reset
Re-initialize system
Use speech recognition (available in Phrasebook)
Show the list of Main Menu sections and active applications
Use speech function
Close active window / Cancel
Delete character to the left of cursor
Switch focus between displayed controls (check boxes, radio
buttons etc.)
Type in uppercase / Enter additional symbols (marked on the
numeric keys)
+
,
Launch spell-checker
