ECTACO
®
Partner
®
EP900
User Manual
8
Power Supply
ECTACO
®
Partner
®
EP900 is powered by a special Li-Polymer rechargeable battery.
When the battery becomes weak, the red LED signal starts blinking. To restore full
functionality of the device, recharge the battery as soon as possible.
The battery compartment is located on the back of the device and is covered with a
plastic cover.
To open the battery compartment, unscrew two screws, holding the battery compartment
cover.
How to Recharge the Battery
Note:
Only a special rechargeable battery, special charger, and special USB cable may
be used with your ECTACO
®
Partner
®
EP900. Use of an inappropriate external power
supply may cause failure of the device and will void the warranty.
Connect the AC/DC adapter to your device via the mini-USB port (see
General View
),
or connect your device to your PC using the special USB cable. The red LED signal
shows that the battery is recharging.
LED status: blinking blue – recording is in progress or data being transferred; blinking red
– the battery is critically low.
Note:
Charge the battery overnight prior to the first use of the device.
SD Card
Before you start using your ECTACO
®
Partner
®
EP900, please make sure the SD card
(included in the standard package) is installed into the
SD slot
of the device. If the card is
not installed, slide it into the slot located on the right-hand edge of the device – the label
of the card face up, contacts face down. Push the card gently until it clicks into place. To
eject the card, just push it in slightly.
ECTACO
®
Partner
®
EP900 supports SD and SDHC cards.
PC Communication
The
PC Communication
function allows you to manage files and folders stored on the SD
card. For example, you may wish to add books and music files.
Ensure the SD card is installed into the device.
Turn the device on.
Connect the device to your PC using the special USB cable and the mini-USB port
located on the device (see
General View
). Shielded cables must be used with this
device to ensure compliance with the class B FCC limits.
