Ectaco Partner EA B-3, User Manual

Page: 9 / 57

ECTACO Partner
®
EA B-3 User Manual
9
Tap the screen with the supplied pointing device called the stylus which, when not
in use, is conveniently kept in a special slot at the side of the device’s back panel.
♦
Note: If, for some reason, using the stylus does not provide the desired effect,
you may need to recalibrate the screen (see Launcher Menu on page 13).
ECTACO Partner ® EA B-3 comes with a hard plastic cover to protect the screen
when the device is not in use. To attach the cover, insert the pegs on the cover into
the holes on either side of the device. To detach the cover, gently snap the pegs
out of the holes. We recommend that you keep the cover attached when you are
not using your ECTACO Partner ® EA B-3.
Power Supply
ECTACO Partner
®
EA B-3 is powered by two AAA (LR03) batteries. If the battery
power runs too low, the unit will start up when you press the On/Off button but will
then shut off automatically. When this happens, please replace the batteries
immediately to avoid the risk of losing user data.
♦
Note: Make sure the battery is inserted in the battery compartment before
connecting your device to a PC.