Language Teacher
model ESC600T
10
•
Press the ON/OFF key to turn the unit off.
•
Remove the battery compartment cover by pushing its
latch down and away from the unit.
•
Take out the middle battery first, then slide toward
center and remove two remaining batteries.
•
Insert three new batteries, placing the last one in the
middle.
Note:
Make sure to place the batteries according to the
polarity markings (+ -) inside the compartment.
•
Align the cover at the bottom of the battery
compartment and slightly press on the latch to engage
the lock.
You have 2 minutes to replace the batteries without risk
of a system reset, which may cause loss of user's data
stored in RAM.
Do not exceed the 2 min. limit! Neither manufacturer
nor dealer may be held responsible for the loss of
user’s data.
Note:
Never try to remove batteries from the translator
when the power is on. This can seriously damage the
device. Accidentally doing so, as well as certain other
circumstances (e.g. forgotten password), may compel
you to reset the dictionary manually. Use a pointed
device to press the reset button located on the front
panel next to the A key.
During a system reset, press the N key at the prompt
System Initialization. Press (Y/N) key
to attempt
preserving user’s data and a customized system
configuration. However, if RAM has been corrupted, or if
you turn the dictionary on for the first time, you will have
to press Y to reinitialize the system.
Note:
The
Language Teacher
ESC600T
is equipped
with a jack for external power supply. To order a
