ECS UM4980 User Manual Download Page 36

Page: 36 / 46

User’s Manual

Shadow Memory Regions

shadows the option ROM located in the speci-

fied blocks of memory, and can improve the system performance.

Note:

Some option ROMs do not work properly when
owed.

Advanced

Control

Selecting Advanced

Control from the Advanced System Setup main

menu displays the following screen. Technicians use this menu when chang-

ing values in the

Phoenix Setup Copyright

Phoenix Technologies Ltd.

i pset

Internal cache f

External cache:

External cache feature:

Write through 1

Parity check:
Refresh

Signal

select:

Signal select:
Local

lklay Setting:

CPU

Delay:

Recovery Time Select

c5.31

ESC

Exit

PgUp

Ualue

Configuration

PgDn

Default Configuration

Figure

4-8.

Advanced

Control Screen

Note:

The contents of this menu depends on the

in-

stalled on your mainboard, and

vary

widely.

Consult your dealer or the

help screens before

changing the items on this menu. Incorrect settings
can cause your system to malfunction.

Internal cache feature

sets the internal code/data memory of the CPU to

either

back or

through (default)

External cache sets the

function of the second level cache on-board.

En-

abled (default), the settings of the following options can be set. Disabling

this option will deem the following options useless.

External cache feature

sets the external secondary cache memory to

either

back (default) or

through.

Summary of Contents for UM4980















































Search results

Summary of Contents for UM4980

Reviews:

Related manuals for UM4980

Brands by name

Popular brands

ECS UM4980, User Manual

Search results

Summary of Contents for UM4980

Reviews:

Related manuals for UM4980

Brands by name

Popular brands