ECS RS400-A, Manual, Page: 49 / 88

43
Using BIOS
f
Resume Event Control (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
f
Phoenix-AwardBIOS CMOS Setup Utility
Resume Event Control
Item Help
Menu Level
f
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
mnlk
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Resume By WOL/WOM/Ring [Disabled]
Resume By PCI PME [Enabled]
Resume By USB (S3) [Disabled]
Resume By PCI-E [Enabled]
Resume By Mouse [Disabled]
Resume By Keyboard [Disabled]
Resume By KB Password Enter
Hot Key Resume Ctrl-F1
PWRON After PWR-Fail [Off]
RTC Alarm Resume [Disabled]
Date (of Month) Alarm 0
Time (hh:mm:ss) Alarm 0 0 0
x
x
x
x
Resume by PCI PME (Enabled)
This item specifies whether the system will be awakened from power saving modes when
activity or input signal of the specified hardware peripheral or component is detected.
Resume by USB (S3) (Disabled)
This option allows the activity of the USB devices to wake up the system from S3 sleep
state.
RTC Alarm Resume (Disabled)
When set to Enabled, additional fields become available and you can set the date (day of the
month), hour, minute and second to turn on your system. When set to 0 (zero) for the day
of the month, the alarm will power on your system every day at the specified time.
Resume by WOL/WOM/Ring (Disabled)
This item specifies whether the system will be awakened from power saving modes when
activity or input signal of WOL/WOM/Ring device is detected.
Resume by PCI-E (Enabled)
This option allows the activity of the PCI-E device to wake up the system from sleeping
status.
Resume by Mouse (Disabled)
This option allows the activity of the mouse device to wake up the system from sleeping
status.
Resume by Keyboard (Disabled)
This option allows the activity of the keyboard device to wake up the system from sleeping
status.
• Resume By KB Password (Enter) : Use this item to define the password
when using the keyboard to resume the system.
• Hot Key Resume (Ctrl-F1) : Use this item to define the password when
using the keyboard “hot key” to resume the system.
PWRON After PWR-Fail (Off)
This item enables your computer to power on after the power returns from a power failure.