1-8
3. IDE 1 Connector, 40-1 pin)
®
4. SATA A0/B0/C0/A1/B1/C1 (Serial ATA Connectors, 7 pin)
These next generation connectors delivered by the NVIDIA MCP55
supporting Serial ATA hard disks. Each channel can operate at 3.0 Gb/
s per direction. Full Tagged Command Queuing (TCQ), Native Com-
mand Queuing (NCQ), and Hot plug are supported.
®
5. USB 0/1, 2/3/,4/5 (Front USB Headers, 10-1 pin)
If the USB ports on the rear panel are inadequate, three USB headers are
available for additional USB ports. The USB headers complies with USB 2.0
specification that supports up to 480 Mbps connection speed.
The front panel connector provides a standard set of switch and LED
connectors commonly found on ATX or micro-ATX cases.
6. FRT PNL (Front Panel Header, 10-1 pin)
7. SYSFAN 1~2 (Cooling Fan Connectors, 3 pin)
These connectors allow you to link with the cooling fans to lower the
system temperature.
Connect the serial device to this header.
8. SERIAL
This is supported by NVIDIA MCP55. Please connect the first hard disk to
IDE 1. The streamline IDE cable must be the same side with the Pin 1.
