3-15
Resume by Alarm [Disabled]
When set to Enabled, additional fields become available and you can set the date (day
of the month), hour, minute and second to turn on your system. When set to 0 (zero)
for the day of the month, the alarm will power on your system every day at the
specified time.
**Reload Global Timer Events**
Global Timer (power management) events are I/O events whose occurrence can
prevent the system from entering a power saving mode or can awaken the system
from such a mode. In effect, the system remains alert for anything that occurs to a
device that is configured as Enabled, even when the system is in a power-down mode.
Primary IDE0/1 [Disabled]
When these items are enabled, the system will restart the power-saving timeout
counters when any activity is detected on any of the drives or devices on the primary
or secondary IDE channels.
Secondary IDE0/1 [Disabled]
When this item is enabled, the system will restart the power-saving timeout counters
when any activity is detected on the floppy disk drive, serial ports, or the parallel port.
Power on After Power-fail [Off]
This item enables your computer to automatically restart or return to its last operating.
3.3-6 PNP/PCI Configurations
These options configure how PnP (Plug and Play) and PCI expansion cards
operate in your system. Both the the ISA and PCI buses on the motherboard
use system IRQs (Interrup ReQuests) and DMAs (Direct Memory Access).
You must set up the IRQ and DMA assignments correctly through the
PnP/PCI Configurations Setup utility for the motherboard to work properly.
Selecting PnP/PCI Configurations on the main program screen displays this
menu:
Phoenix-AwardBIOS CMOS Setup Utility
PnP/PCI Configurations
Init Display First
[PCI Slot]
Reset Configuration Data
[Disabled]
Resources Controlled By
[Auto(ESCD)]
IRQ Resources
Press Enter
PCI/VGA Palette Snoop
[Disabled]
Assign IRQ For USB
[Enabled]
INT Pin 1 Assignment
[Auto]
INT Pin 2 Assignment
[Auto]
INT Pin 3 Assignment
[Auto]
INT Pin 4 Assignment
[Auto]
INT Pin 5 Assignment
[Auto]
INT Pin 6 Assignment
[Auto]
INT Pin 7 Assignment
[Auto]
INT Pin 8 Assignment
[Auto]
Item Help
Menu Level
X
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help