manualshive.com logo in svg

ECS P67H2-A4, Manual

Share
Download
ECS P67H2-A4 Manual Download Page 20

14

Installing the Motherboard

Installing Add-on Cards

The slots on this motherboard are designed to hold expansion cards and connect them
to the system bus. Expansion slots are a means of adding or enhancing the
motherboard’s features and capabilities. With these efficient facilities, you can in-
crease the motherboard’s capabilities by adding hardware that performs tasks that are
not part of the basic system.

Before installing an add-on card, check the documentation for the card
carefully. If the card is not Plug and Play, you may have to manually
configure the card before installation.

Expansion Slots

The PCI Express x1 slots are fully compliant to the PCI Ex-
press Base Specification revision 2.0.

PCIE1~3 Slots

PCIEX16 Slot

The PCI Express x16 slot is used to install external PCI Express
graphics cards that is fully compliant to the PCI Express Base
Specification revision 2.0.

PCIEX16_S Slot

The PCI Express x16 slot  is fully compliant to the PCI Express
Base Specification revision 2.0.

Summary of Contents for P67H2-A4





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands