manualshive.com logo in svg

ECS P67H2-A2, Manual, Page: 83 / 102

Share
Download
ECS P67H2-A2 Manual Download Page 83

75

Intel

®

 Matrix Storage Manager RAID Configurations

The Intel

® 

Matrix Storage Manager allows you to configure RAID 0, and 1 sets on the

external Serial ATA hard disk drives.

Complete the following steps before you create a RAID set:

1.

Install the external Serial ATA hard disk drive (HDD) on your system.

2.

Set the 

Onboard SATA Mode

 item in the BIOS to .

RAID

..

See section “Integrated Peripherals” for details.

Before creating a RAID set

Prepare the following items:

1.

One SATA HDD.

2.

A write-enabled floppy disk.

3.

Microsoft

®

 Windows

®

 OS installation disk (Windows XP/Vista).

4 .

Motherboard support CD with Intel

® 

Matrix Storage Manager driver.

Chapter 8
Intel

® 

Matrix Storage Manager RAID Configurations

3 .

Enter the Intel

® 

Matrix Storage Manager option to set up your RAID

configuration.

4 .

Create an Intel

® 

Matrix Storage Manager driver disk for Windows

®

 OS

installation. See section “Creating a RAID driver disk” for details.

5.

Install the Intel

® 

Matrix Storage Manager driver after the Windows

®

 OS

had been installed.

Summary of Contents for P67H2-A2







































































































Reviews:

No comments