ECS MB45II7, User Manual, Page: 29 / 70

23
Using the Notebook Computer
Adjusting the LCD Screen Display
The LCD screen display can be adjusted by the following key
combinations.
Fn + F4
Changes Display Mode: LCD-only, CRT/HDMI-only and simultaneous
LCD&CRT/HDMI.
Fn + F7
Decrease the brightness level.
Fn + F8
Increase the brightness level.
LCD Care
LCD screens are delicate devices that need careful handling. Please pay
attention to the following precautions:
When you are not using the computer, keep the LCD screen closed to
protect it from dust.
If you need to clean your LCD screen, use a soft tissue to gently wipe the
LCD surface.
Do not put your fingers or sharp objects directly on the surface and
never spray cleaner directly onto the display.
Do not press on, or store any objects on the cover when it is closed.
Doing so may cause the LCD to break.
External CRT Display
You can hook up an external monitor through the 15-pin CRT connector.
LCD only
CRT/HDMI only
Simultaneous LCD&CRT/HDMI
You can switch between these display configurations by pressing the key
combination
[Fn] + [F4] .