manualshive.com logo in svg

ECS L7VTA, Manual, Page: 7 / 60

Share
Download
ECS L7VTA Manual Download Page 7

 

AC’ 97 Audio 
Codec 

The AC’ 97 Audio codec is compliant with the AC’ 97 2.2 
specification, and supports 18-bit ADC (Analog Digital Con-
verter) and DAC (Digital Analog Converter) resolution as well 
as 18-bit stereo full-duplex codec with independent and vari-
able sampling rates. Further features include support for four 
analog line-level stereo inputs. 

Expansion 
Options 

L7VTA has five 32-bit PCI slots, an AGP slot (supports 1.5V 4x 
AGP card only) and CNR (Communications and Networking 
Riser) slot.  

The L7VTA supports Ultra DMA bus mastering with transfer 
rates of 33/66/100/133 MB/sec. 

The Realtek RTL8100B LAN chip is incorporated in the chipset 
providing the mainboard with 10/100Mbps fast Ethernet con-
troller and integrated Ethernet PCI LAN capabilities. 

Onboard LAN 
(optional) 
 

The VT6103 is a Physical Layer device for Ethernet 10BASE-T 
and 100BASE-TX using category 5 Unshielded, Type 1 
Shielded, and Fiber Optic cables. 

• 

Dual Speed – 100/10 Mbps 

• 

Half And Full Duplex 

• 

Meet All Applicable IEEE 802.3, 10Base-T and 100Base-
Tx Standards 

• 

Adaptive Equalizer 

1394a (optional) 

• 

VT6306 PCI 1394a integrated host controller 

• 

Compliant with 1394 open HCI specifications v1.0 and 
v1.1 

• 

Supports provisions of IEEE 1394-1995 standard for high 
performance serial bus and the P1394a supplement 4.0 

• 

32 bit CRC generator and checker for receive and trans-
mit data 

• 

Compliant with PCI specification v2.2 

• 

High-performance bus mastering support 

• 

Provides three 1394a fully compliant cable ports at 
100/200/400 Mbit per second 

Promise 20265 
(optional) 

• 

Supports Ultra ATA100 drives and backward compatible 
with Ultra ATA66/33 & EIDE drives (identical drives rec-
ommended) 

• 

Supports IDE RAID 1 (mirroring) or 0 (striping) 

• 

Supports UDMA 5/4/3/2/1/0, DMA 2/1/0, PIO 4/3/2/1/0 
modes 

• 

Two independent IDE channels support up to four 
UDMA/100/66/33 or EIDE drives 

Integrated I/O 

The mainboard has a full set of I/O ports and connectors: 

• 

Two PS/2 ports for mouse and keyboard 

• 

Two serial port 

• 

One parallel port 

• 

Four USB ports 

• 

One 1394a port (optional) 

• 

Audio jacks for microphone, line-in and line-out 

 

 

 

3 

Summary of Contents for L7VTA





























































Reviews:

No comments