Frequency/Voltage Control
This BIOS menu enables you to set the clock speed and system bus for your
system. The clock speed and system bus are determined by the kind of proc-
essor you have installed in your system.
CMOS Setup Utility – Copyright (C) 1984 – 2001 Award Software
Frequency/Voltage Control
Item Help
CPU Clock Ratio
[10 X]
Auto Detect DIMM/PCI Clk
[Enabled]
Spread Spectrum
[Enabled]
Over Clock Function
[Press Enter]
Menu Level
↑
↓
→
←
: Move
Enter: Select
+/-/PU/PD: Value: F10: Save ESC: Exit F1:General Help
F5:Previous Values
F6:Fail-Safe Defaults
F7:Optimized Defaults
CPU Clock Ratio (10 X)
Use the CPU Host/SDRAM/PCI Clock to set the frontside bus frequency for
the installed processor (usually 133 MHz, 100 MHz or 66 MHz). Then use
CPU Clock Ratio Jumpless
to set a multiple. The multiple times the frontside
bus must equal the core speed of the installed processor e.g.,
3.5 (multiple) x
100 MHz (frontside bus) = 350 MHz (installed processor clock speed).
Auto Detect DIMM/PCI Clk (Enabled)
When this item is enabled, BIOS will disable the clock signal of free DIMM and
PCI slots.
Spread Spectrum (Enabled)
If you enable spread spectrum, it can significantly reduce the EMI (Electro-
Magnetic Interference) generated by the system.
46