manualshive.com logo in svg

ECS L4S5A, User Manual, Page: 42 / 53

Share
Download
ECS L4S5A User Manual Download Page 42

 

38 

Power Management Timeouts 

The power-saving modes can be controlled by timeouts. If the system is inac-
tive for a time, the timeouts begin counting. If the inactivity continues so that 
the timeout period elapses, the system enters a power-saving mode. If any 
item in the list of Reload Global Timer Events is Enabled, then any activity on 
that item will reset the timeout counters to zero. 

Wake Up Calls 

If the system is suspended, or has been powered down by software, it can be 
resumed by a wake up call that is generated by incoming traffic to a modem, a 
LAN card, a PCI card, or a fixed alarm on the system realtime clock,  

CMOS Setup Utility – Copyright (C) 1984 – 2001 Award Software 

Power Management Setup 

Item Help 

  ACPI function 

[Enabled] 

  ACPI Suspend Type 

[S1(POS)]  

  Video Off Option 

[Suspend --> Off] 

  Video Off Method 

[DPMS Supported]  

  MODEM Use IRQ 

[Auto]  

  Hot Key Function as 

[Power Off] 

  Hot Key Power On Function 

[Disabled] 

  USB S3  Wakeup Function 

[Disabled] 

  HDD Off After 

[Disabled] 

  Power Button Override 

[Instant-Off] 

  Power State Resume Control 

[Always Off] 

  PM Wake Up Events 

[Press Enter] 

Menu Level       
 

↑

 

↓

 

→

 

←

 : MoveEnter  : Select  +/-/PU/PD:Value:  F10: Save  ESC: Exit  F1:General 

Help  F5:Previous Values 

F6:Fail-Safe Defaults 

F7:Optimized Defaults 

ACPI Function (Enabled) 

This mainboard supports ACPI (Advanced Configuration and Power man-
agement Interface). Use this item to enable or disable the ACPI feature. 

Note:

  ACPI is a power management specification that makes h ardware status in-

formation available to the operating system. ACPI enables a PC to turn its 
peripherals on and off for improved power management. It also allows the 
PC to be turned on and off by external devices, so that mouse or keyboard 
activity wakes up the computer.  

ACPI Suspend Type (S1(POS)) 

Use this item to define how your system suspends. In the default, S1(POS), 
the suspend mode is equivalent to a software power down. If you select S3 
(STR), the suspend mode is a suspend to RAM, i.e., the system s huts down 
with the exception of a refresh current to the system memory.  

Summary of Contents for L4S5A






















































Reviews:

No comments