manualshive.com logo in svg

ECS IC890GXM-A, Manual, Page: 42 / 78

Share
Download
ECS IC890GXM-A Manual Download Page 42

38

Using BIOS

SMART Fan Mode (Normal)

This item allows you to select the fan mode (Normal, Quiet, Silent, or Manual) for a
better operation environment. If you choose Normal mode, the fan speed will be
auto adjusted depending on the CPU temperature. If you choose Quite mode, the fan
speed will be auto minimized for quiet environment. If you choose Silent  mode, the
fan speed will be auto restricted to make system more quietly. If you choose Manual
mode, the fan speed will be adjust depending on users’ parameters.

CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
                                              Smart Fan Function

Help Item

SMART Fan Control

Enabled

SMART Fan Mode

Quiet

SMART Fan start PWM value                      144
SMART Fan start TEMP.(°C)                      60
DeltaT1                                                       +3
SMART Fan Slope PWM value                    14 PWM value/°C

CPU FAN Full Limit Temp

68°C

Normal: auto ajusts
depending on the CPU
temperature.

Quiet: auto minimizes
fan speed for quiet
environment operation.

F10: Save       ESC: Exit

+/-/: Value

Enter : Select

F9: Default settings

F1:General Help

: Move

mnlk

CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
                                              Smart Fan Function

Help Item

SMART Fan Control

Enabled

SMART Fan Mode

Silent

SMART Fan start PWM value                      130
SMART Fan start TEMP.(°C)                      60
DeltaT1                                                       +3
SMART Fan Slope PWM value                    14 PWM value/°C

CPU FAN Full Limit Temp

68°C

Normal: auto ajusts
depending on the CPU
temperature.

Quiet: auto minimizes
fan speed for quiet
environment operation.

F10: Save       ESC: Exit

+/-/: Value

Enter : Select

F9: Default settings

F1:General Help

: Move

mnlk

Summary of Contents for IC890GXM-A















































































Reviews:

No comments