ECS HDC-I Manual Download Page 32 | Manualshive

Page: 32 / 52

ECS HDC-I Manual Download Page 32

28

Using BIOS

+/- : Change Opt.

Enter : Select

:Select Screen

:Select Item

Power Management Setup

Resume By PME

[Enabled]

Resume By USB (S3)

[Disabled]

EUP Function

[Enabled]

F1:General Help

Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.

F2:Previous Values

F3:Optimized Defaults

F4:Save & Exit

ESC:Exit

About Resume by USB (S3)

Power Management Setup

This page sets up some parameters for system power management operation.

Resume By PME (Enabled)

The system can be turned off with a software command. If you enable this item, the
system can automatically resume if there is an incoming call on the PCI Modem or
PCI LAN card. You must use an ATX power supply in order to use this feature. Use
this item to do wake-up action if inserting the PCI card.

Resume By USB (S3) (Disabled)

This item allows you to enable/disable the USB device wakeup function from S3
mode.

Main

Advanced

Chipset Frequency/Voltage Control Boot Security Save & Exit

EUP Support (Enabled)

This item allows user to enable or disable EUP support.

Version 2.10.1208. Copyright (C) 2010, American Megatrends, Inc.

Press <Esc> to return to the Advanced Menu page.

«
...
30
31
32
33
34
...
»

Summary of Contents for HDC-I





















































Reviews:

No comments