manualshive.com logo in svg

ECS H87H3-M4, User Manual, Page: 88 / 94

Share
Download
ECS H87H3-M4 User Manual Download Page 88

84

H87H3-M4 USER MANUAL

Chapter 5

Pressing <Y> deletes all the data in the HDDs.

5.

The following screen appears, displaying the relevant information about

the RAID set you created.

Users please be noted that RAID 0 (Stripe) is set to accelerate the data
access, and RAID 1 (Mirror) is set to provide the data backup. If you want
to set RAID 0, you need to set the 

2nd Boot Device

 item in the BIOS to 

Intel

Volume0

. See section “Advanced Setup” for details.

4.

When done, press <Enter> to confirm the creation of the RAID set. A dia-

logue box appears to confirm the action. Press <Y> to confirm; otherwise,
press <N>.

Sets the system boot order

         

Main 

           

 Advanced

    

     Chipset            M.I.B. III               

Boot

               Security              Exit

Hard Disk Drive Priorities

1st Boot

Intel volume0

+/- : Change Opt.

Enter/Dbl Click : Select





: Select Screen

/

Click: Select Item

F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit

Summary of Contents for H87H3-M4































































































Reviews:

No comments