manualshive.com logo in svg

ECS H61H2-M9, Manual

Share
Download
ECS H61H2-M9 Manual Download Page 54

50

Using BIOS

Press <Esc> to return to the M.I.B III Menu page.

Enhanced Intel SpeedStep Technology (Enabled)

This item allows users to enable or disable the EIST (Enhanced Intel SpeedStep
Technology).

Turbo Mode (Enabled)

This item allows you to control the Intel Turbo Boost Technology.

Internal PLL OverVoltage (Disabled)

This item allows you to control the Internal PLL OverVoltage.

Runtime Turbo Enable (Disabled)

This item shows if CPU support runtime turbo or not.

Over Clocking Extra Vol.(1/256 V) (0)

Use this item to set over clocking extra voltage.

IA Core Current Max(1/8 Amp) (1680)

Use this item to control CPU Current Limit.

iGFX Core Current Max(1/8 Amp) (800)

Use this item to control iGFX Core Current Limit.

Long Duration Power Limit Override (1440)

Intel(R) Turbo Boost Technology will use this power limit during the long duration
power limit time window.

Long Duration Maintained (10)

Use this item to control the time window over PL1 value should be maintained. This
is for Turbo mode.

Short Duration Power Limit Override (1680)

Intel(R) Turbo Boost Technology will use this power limit for a very short duration.
After that, the long duration power limit will be honored.

Summary of Contents for H61H2-M9









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands