manualshive.com logo in svg

ECS H61H2-M7, User Manual, Page: 62 / 76

Share
Download
ECS H61H2-M7 User Manual Download Page 62

58

Using BIOS

VDIMM (1.524V)

This item displays the current VDIMM voltage.

CPU Current Voltage (1.020V)

This item diplays the CPU current voltage.

VAXG Voltage (1.044V)

This item displays the current VAXG voltage.

B.O.M.P Technology (Enabled)

This item allows users to enable or disable B.O.M.P technology. This function can
run safe setting to setup menu when system boot fail 3 times.

Spread Spectrum (Enabled)

If you enable spread spectrum, it can significantly reduce the EMI (Electro-Magnetic
Interference) generated by the system.

Genuine Intel(R) CPU 0 @ 2.40GHz

This is display-only field and displays the information of the CPU installed in your
computer.

Processor Speed (2400MHz)

This item shows the CPU speed.

Total Memory (2048MB(DDR3 1066))

This item shows the total momery of DDR3.

Auto Detect DIMM/PCI Clk (Enabled)

When this item is enabled, BIOS will disable the clock signal of free DIMM/PCI slots.

Command Rate (Auto)

This item allows users to set command rate.

Summary of Contents for H61H2-M7













































































Reviews:

No comments