ECS H61H2-M5 Manual Download

Page: 63 / 84

Using BIOS

Boot Override

Use this item to select the boot device.

Save Changes and Exit

This item enables you to save the changes that you have made and exit.

Discard Changes and Exit

This item enables you to discard any changes that you have made and exit.

Save Changes and Reset

This item enables you to save the changes that you have made and reset.

Save Options

This item enables you to save the options that you have made.

Save Changes

This item enables you to save the changes that you have made.

Discard Changes

This item enables you to discard any changes that you have made.

Restore Defaults

This item enables you to restore the system defaults.

Save as User Defaults

This item enables you to save the changes that you have made as user defaults.

Restore User Defaults

This item enables you to restore user defaults.

Discard Changes and Reset

This item enables you to discard any changes that you have made and reset.

Save Changes and Exit

Discard Changes and Exit
Save Changes and Reset
Discard Changes and Reset

Save Options
Save Changes
Discard Changes

Restore Defaults
Save as User Defaults
Restore User Defaults

Boot Override

Main

Advanced Chipset M.I.B III Boot Security

Save & Exit

Exit system setup after saving
the changes.

+/- : Change Opt.

Enter : Select

F1: General Help

:Select Screen

:Select Item

F2: Previous Values
F3: Optimized Defaults

ESC: Exit

F4: Save & Exit

Save & Exit Setup

Yes

Save configuration and exit?

Summary of Contents for H61H2-M5





















































































Search results

Summary of Contents for H61H2-M5

Reviews:

Related manuals for H61H2-M5

Brands by name

Popular brands

ECS H61H2-M5, Manual

Search results

Summary of Contents for H61H2-M5

Reviews:

Related manuals for H61H2-M5

Brands by name

Popular brands