manualshive.com logo in svg

ECS H61H2-A, Manual, Page: 39 / 88

Share
Download
ECS H61H2-A Manual Download Page 39

35

Using BIOS

Press <Esc> to return to the Advanced Menu page.

SATA Configuration

Use this item to show the mode of serial SATA configuration options.

SATA Configuration

SATA Mode

                    

[IDE Mode]

Serial-ATA Controller 0

                    [Compatible]

Serial-ATA Controller 1

                    [Enhanced]

SATA Port1

                    Not Present

SATA Port2

                    Not Present

SATA Port3

                    Not Present

SATA Port4

                    Not Present

Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.

 

Version 2.11.1210. Copyright (C) 2011, American Megatrends, Inc.

+/-  : Change Opt.

:Select Screen

:Select Item

          F1:General Help

          F2:Previous Values

          F3:Optimized Defaults

          F4:Save & Exit

          ESC:Exit

Enter : Select

(1) IDE Mode. (2) AHCI Mode.

Main

  Advanced 

  Chipset     M.I.B III     Boot     Security    Save & Exit

Serial-ATA Controller 0/1 (Compatible/Enhanced)

Use this item to show the Serial-ATA cotroller options: Disabled, Compatible, En-
hanced.

SATA Mode (IDE Mode)

Use this item to select SATA mode.

SATA Port1~4 (Not Present)

This motherboard supports four SATA channel and each channel allows one SATA
device to be installed. Use these items to configure each device on the SATA channel.

Summary of Contents for H61H2-A

























































































Reviews:

No comments