Note:
1. A DC 24V power supply from device or sensor is necessary for the AI port.
2. If DO is designed to drive a relay, a diode must been applied to the relay’s coil side.
Item Description
1.3
Cleaning/Disinfecting
During normal use GWS-BTI2 may become soiled and should, therefore, be cleaned regularly.
Steps:
1.
Wipe GWS-BTI2 with a clean cloth that has been moistened in the cleaning solution.
2.
Prepare agent per manufacturer’s instructions or hospital protocol.
3.
Wipe thoroughly with a clean cloth.
Caution! Do not immerse or rinse GWS-BTI2 or its peripherals. If you accidentally spill
liquid on the device, disconnect the unit from the power source. Contact your
Biomed personnel regarding the continued safety of the unit before placing it
back in operation.
Do not spray cleaning agent on the chassis.
Do not use disinfectants that contain phenol.
Do not autoclave or clean GWS-BTI2 or its peripherals with strong aromatic,
chlorinated, ketone, ether, or other solvents, sharp tools or abrasives. Never
immerse electrical connectors in water or other liquids.
GWS-BTI2 Ruggedized Intelligent Gateway 4
Attention! Ne pas immerger ou rincer GWS-BTI2 ou ses périphériques. Si vous
renversez par accident un liquide sur l'appareil, débranchez l'appareil de la
source d'alimentation. Contactez votre Biomed concernant la sécurité
Gerneral
I/ O Interface
˙Certification
FCC,CE,UL,BSMI
˙Serial Ports
RS232/485 (M12 connector)
˙Dimension
312 x 216 X 44.5 mm
˙LAN
Dual 10/100/1000 Base-T (M12 connectorx2)
˙Enclosure
Aluminum
˙USB Ports
USB 3.1 (M12 connector) / USB 2.0 (M12 connector)
˙Mounting
DIN-rail,Wallmount, VESA
˙VGA Port
VGA, 1600x1200 @60Hz (M12 connector)
˙Power Consumption
60W (Typical)
˙Power Requierments
9~36VDC (e.g +24V@3A) (Min. 72W),AT
˙Weight
3.0kg
˙OS Support
Windows 10 IOT core, Ycoto Linux
˙System Design
Fanless
System Hardware
Envirom ent
˙CPU
On Board ATOM Bay trial-I E3825 1.33GHz
˙Humidity
95% @ 40℃(non-condensing)
˙Memory
DDR3L 2GB On Board
˙Operating Temperature
-20~60℃(-4~140℉) @5~85%RH (with air flow)
˙Indicators
LED for Power, LoRa,LAN (Active,Status)
˙Storage Temperature
-20~60℃(-4~140℉)
˙Storage
eMMC : Up to 32GB
˙Shock Protection
IEC 60068-2-27
HDD: Support One 2.5" SATA HDD
eMMC:50G @ wall mount, half sine, 11ms
˙Display
1xVGA, 1600x1200 @60Hz
HDD:20G @ wall mount, half sine, 11ms
˙Audio
Not Support
˙Vibration Protection
IEC 60068-2-64(Random 10ct./min, 1hr/axis.)
˙Watchdog Timer
Programmable level timer interval, from 1to 255 sec
eMMC : 2 Grms @ 5~500Hz,
˙Mini PCIe Expansion
2xFull-size w/USB/routing (Wifi / BT / 3G / Zigbee )
HDD: 1 Grms @5~500Hz
˙GWS-BTI2
Intel ATOM Bay trial-I E3825 1.33GHz Box Computing
˙Adaptor
˙GWS-BTI2-SH
GWS-BTI2 with extend 2xDI/ 2xDO /1xRS232/1xRS485
˙Wi-Fi Module
˙GWS-BTI2-TS
GWS-BTI2 with extend 2x10/100Mbps LAN/2xDI/2xDO
˙Attena
˙GWS-BTI2-EN
GWS-BTI2 with extend 2xRS232/2xRS485 with isolate
˙Wall Bracket
˙GWS-BTI2-LR
GWS-BTI2 with 16 channel LoRa Base Station
Specifications
Ordering Information
Accessories