35
Using BIOS
Integrated Peripherals
This page sets up some parameters for peripheral devices connected to the system.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Integrated Peripherals
Onboard IDE Controller
Enabled
Onboard SATA Controller
Enhanced
Onboard LAN Function
Enabled
Onboard LAN Boot ROM
Disabled
Onboard AUDIO Function
Enabled
Serial Port1 Address
3F8/IRQ4
Serial Port2 Address 2F8/IRQ3
Serial Port2 Mode Normal
Parallel Port Address
378
Parallel Port Mode
ECP
ECP Mode DMA Channel
DMA3
Parallel Port IRQ IRQ7
USB Functions
Enabled
Legacy USB Support
Enabled
DISABLED: disables inte-
grated IDE Controller.
ENABLED: enables boot
Controllers.
Help Item
F10: Save ESC: Exit
+/-/: Value
Enter : Select
F9: Load Default Settings
F1:General Help
: Move
mnlk
OnBoard IDE Controller (Enabled)
Use this item to enable or disable the onboard IDE interface.
Onboard SATA Controller (Enhanced)
This item allows you to enable or disable the onboard SATA controller.
OnBoard LAN Function (Enabled)
Use this item to enable or disable the onboard LAN function.
OnBoard LAN Boot ROM (Disabled)
Use this item to enable or disable the booting from the onboard LAN or a network
add-in card with a remote boot ROM installed.
Onboard AUDIO Function (Enabled)
Use this item to enable or disable the onboard audio device.
Serial Port1 Address (3F8/IRQ4)
Use this item to enable or disable the onboard COM1 serial port, and to assign a port
address.
Serial Port2 Address (2F8/IRQ3)
Use this item to enable or disable the onboard COM2 serial port, and to assign a port
address.
Serial Port2 Mode (Normal)
If Serial Port 2 Address is not disabled, it allows you to set the Serial Port 2 Mode.
Parallel Port Address (378)
Use this item to enable or disable the onboard Parallel port, and to assign a port
address.