ECS ES10IS2, Service Manual

Page: 17 / 23

Chapter 1 General System Description
Page 17 of 23
2.3.2 Power Management State Transition
Full-On (S0)
Power/Suspend button
Lid switch
Idle (S0)
resume
Power/Suspend button
Lid switch
Suspend (S3)
resume
Power/Suspend button
Lid switch
SOFF/STD (S4/S5)
resume
2.3.3 Power Management Mode Definitions
Each system (or model) may have different PM model and state definition. For clear, see the following table:
PM Mode Definitions
Full-On The CPU run in full speed and all the devices are power on. The system can respond to all
applications with maximum performance.
1. The system in the state S0.
2. The CPU in the state C0.
3. All the devices in the state D0.
Idle This mode is similar to Full-On except the CPU will change to C1 or C2 state depend on the OS, to
save CPU power consumption.
1. The system in the state S0.
CPU in full speed (C0)
All Devices are working
CPU STPCLK (C2)
All Devices are working
CPU STPCLK (C2)
All Devices are in low power
state
CPU power off
All Devices except RTC are
power off