ECS Elitegroup P4M8OOPRO, User Manual, Page: 38 / 92

32
Using BIOS
Vanderpool Technology (Enabled)
This item enables or disables the Vanderpool Technology. When disabled, forcess the VT
function will close.
Press <Esc> to return to the main menu setting page.
BIOS Protect (Disabled)
This item enables or disables the BIOS protection function.
Features Setup
This page sets up some parameters for peripheral devices connected to the system.
OnBoard Floppy Controller Enabled
Serial Port1 Address 3F8/IRQ4
Serial Port1 Mode Normal
Parallel Port Address 378
Parallel Port Mode ECP
ECP Mode DMA Channel DMA3
Parallel Port IRQ IRQ7
OnBoard PCI IDE Controller Both
OnBoard SATA-IDE IDE
Audio Device Enabled
Modem Device Auto
Onboard LAN Enabled
Onboard LAN Boot ROM Disabled
Onboard USB Function Enabled
USB Function For DOS Enabled
Allow BIOS to Enable or
Disable Floppy Controller.
Help Item
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Features Setup
: Move
F10: Save
+/-/: Value Enter : Select ESC: Exit
F9: Optimized Defaults
F1:General Help
< >
OnBoard Floppy Controller (Enabled)
Use this item to enable or disable the onboard floppy disk drive interface.
Serial Port1 Address (3F8/IRQ4)
Use this item to enable or disable the onboard COM1 serial port, and to assign a port address.
Parallel Port Address (378)
Use this item to enable or disable the onboard Parallel port, and to assign a port address.
Parallel Port Mode (ECP)
Use this item to select the parallel port mode. You can select Normal (Standard Parallel
Port), ECP (Extended Capabilities Port), EPP (Enhanced Parallel Port), or BPP (Bi-
Directional Parallel Port).
Serial Port1 Mode (Normal)
Use this item to select the onboard COM1 serial port mode.