BAT-I2 USER MANUAL
32
Chapter 3
+/- : Change Opt.
Enter : Select
lk
mn
:Select Screen
:Select Item
Power Management Setup
Resume By PME
[Disabled]
Resume By USB
[Enabled]
Resume By PS2 KB
[Disabled]
Resume By PS2 MS
[Disabled]
Resume By RTC Alarm
[Disabled]
EUP Function
[Enabled]
Power LED Type
[Dual Color LED]
F1:General Help
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
About Resume by PCI/PCI-E/
LAN/Ext.USB 3.0 PME
f
f
f
f
f
Power Management Setup
This page sets up some parameters for system power management operation.
Press <Esc> to return to the Advanced Menu page.
Resume By PME (Disabled)
The system can be turned off with a software command. If you enable this item, the
system can automatically resume if there is an incoming call on the PCI/PCI-E
Modem or PCI/PCI-E LAN card. You must use an ATX power supply in order to use this
feature. Use this item to do wake-up action if inserting the PCI/PCI-E card.
Resume By USB (Enabled)
This item allows you to enable or disable the USB device wakeup function from S3
mode.
Resume By PS2 KB (Disabled)
This item enables or disables you to allow keyboard activity to awaken the system
from power saving mode.The system can be turned off with a software command.
If you enable this item, the system can automatically resume at a fixed time
basedon the system’s RTC (realtime clock). Use the items below this one to set
the date and time of the wake-up alarm. You must use an ATX power supply in order
to use this feature.
Resume By RTC Alarm (Disabled)
EUP Function (Enabled)
This item allows user to enable or disable EUP support.
Power LED Type (Dual Color LED)
This item shows the type of the Power LED.
The system can be turned off with a software command. If you enable this item,
the system can automatically resume at a fixed time based on the system’s RTC
(realtime clock). Use the items below this one to set the date and time of the wake-
up alarm. You must use an ATX power supply in order to use this feature.
Main
Advanced
Chipset M.I.B III Security Boot Exit
Resume By PS2 MS (Disabled)
This item enables or disables you to allow mouse activity to awaken the system
from power saving mode.
