manualshive.com logo in svg

ECS B85H3-M6, User Manual, Page: 36 / 52

Share
Download
ECS B85H3-M6 User Manual Download Page 36

B85H3-M6 USER MANUAL

32

Chapter 3

USB Beep Message (Disabled)

This item disables/enables the beep during USB device enumeration.

Press <Esc> to return to the Advanced Menu page.

Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.

Miscellaneous

Scroll to this item and press <Enter> to view the following screen:

AHCI Port1~5

This motherboard supports five SATA channels and each channel allows one SATA
device to be installed. Use these items to configure each device on the IDE channel.

BIOS Setup Utility

  AHCI Port1: Not Present

  AHCI Port2: Not Present
  AHCI Port3: Not Present
  AHCI Port4: Not Present
  AHCI Port5: Not Present

       Spread Spectrum

[Enabled]

      Processor Multiplier

20

       Bootup Num-lock

[On]

       USB Beep Message

[Disabled]

AHCI Port1

Main

    

Advanced

    Power    Authentication     Security   Boot   Options    Exit

Processor Multiplier (20)

This item shows the information of the processor multiplier.

Spread Spectrum (Enabled)

Use this item to enable or disable system Spread Spectrum function, EMI (Electro-
Magnetic Interface) will reduce if this item is enabled.

Version 2.15.1236. Copyright (C) 2002-2013 American Megatrends,  Inc.

Bootup Num-Lock (On)

This item determines if the Num Lock key is active or inactive at system start-up
time.

+/-/Spacebar  : Change Opt.

Enter : Select

           F1: General Help

:Move

           F2: Previous Values
           F3: Optimized Defaults

            F4: Save and Exit
           ESC: Discard changes and Exit
           Setup

Summary of Contents for B85H3-M6





















































Reviews:

No comments