ECS A885GM-A2, Manual, Page: 40 / 76

36
Using BIOS
PCI / PnP Setup
This page sets up some parameters for devices installed on the PCI bus and those
utilizing the system plug and play capability.
Help Item
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
PCI / PnP Setup
F10: Save ESC: Exit +/-/: Value
Enter : Select
F9: Optimized Defaults F1:General Help
: Move
mnlk
Allocate IRQ to PCI VGA Yes
Press <Esc> to return to the main menu setting page.
Press <Esc> to return to the main menu setting page.
EUP Support (Enabled)
This item allows user to enable or disable EUP support.
YES: Assigns IRQ to
PCI VGA card if card
requests IRQ.
NO: Does not assign
IRQ to PCI VGA card
even if card requests
an IRQ.
Allocate IRQ to PCI VGA (Yes)
Use this item to select which graphics controller to use as the primary boot devices.