manualshive.com logo in svg

ECS A875M-A, Manual, Page: 34 / 74

Share
Download
ECS A875M-A Manual Download Page 34

30

Using BIOS

Boot Up Numlock Status (On)

This item defines if the keyboard Num Lock key is active when your system is
started.

Quick Power on Self Test (Enabled)

Enable this item to shorten the power on testing (POST) and have your system start
up faster. You might like to enable this item after you are confident that your system
hardware is operating smoothly.

AMD C&Q (Auto)

APIC Mode (Enabled)

This item allows you to enable or disable the APCI (Advanced Programmable Inter-
rupt Controller) mode. APIC provides symmetric multi-processing (SMP) for sys-
tems, allowing support for up to 60 processors.

1st/2nd3rd Boot Device (Hard Drive/CD/DVD/Removable Dev.)

Use this item to determine the device order the computer used to look for an
operating system to load at start-up time. The devices showed here will be different
depending on the exact devices installed on your motherboard.

This item helps the system to lower the frequency when CPU idles. When the
frequency decreases, the temperature will drop automatically as well.

Advanced Setup

This page sets up more advanced information about your system. Handle this page
with caution. Any changes can affect the operation of your computer.

Enhanced Halt (C1E) (Disabed)

This item enables or disables enhanced halt.

CMOS Setup Utility - Copyright  (C)  1985-2005, American Megatrends, Inc.

                   Advanced Setup

AMD C&Q

Auto

Core Performance Boost
Enhanced  Halt  (C1E)

Disabled

Quick Power on Self Test

Enabled

Boot Up Numlock Status

On

APIC Mode

Enabled

1st Boot Device

Hard Drive

2nd Boot Device

CD/DVD

3rd Boot Device

Removable Dev.

Hard  Disk Drivers

Press Enter

CD/DVD Drivers

Press Enter

Boot Other Device

Yes

ECS eJIFFY Function

Disabled

Enable/Disable Secure
Virtual Machine Mode
(SUM)

Help Item

F10: Save      ESC: Exit

+/-/: Value

Enter : Select

F9: Optimized Defaults

F1:General Help

: Move

mnlk

f

f

Auto

Core Performance Boost(Auto)

This item only shown when use Phenom II X6 processor. The function is to
switch the active CPU cores to enhance CPU frequency.

auto

Summary of Contents for A875M-A











































































Reviews:

No comments